Car License Plate Frame Backup Camera, Vowin 8 Infrared LEDs Wide Viewing Angle Waterproof Sturdy Sleek Rearview Camera High Sensitive Vehicle Universal Revesing (Black)
You will save 10% on the car rearview camera ONLY TODAY when you purchase one or moreSpecifications – Sensing area: NTSC 4.08 x 3.10mm – Effective Pixels: NTSC 795*596 pixels – Horizontal Resolutions: 480 TV lines – Minimum Illumination: 0lux with IR on – Video output: RCA connector, 1.0V p-p, 75ohm – Power Consumption: 60mA
You will save 10% on the car rearview camera ONLY TODAY when you purchase one or more
– Sensing area: NTSC 4.08 x 3.10mm
– Effective Pixels: NTSC 795*596 pixels
– Horizontal Resolutions: 480 TV lines
– Minimum Illumination: 0lux with IR on
– Video output: RCA connector, 1.0V p-p, 75ohm
– Power Consumption: 60mA
– Power Supply: DC12V
Waterproof Level: IP68
This camera only supports NTSC video system, so please make sure your monitor supports NTSC video system before you buy it.
During installation, please connect the power cable of the backup camera to the harness wires that connect to the backup light on the tail light assembly.
The RED wire end is positive, while the BLACK one is negative. And connect the RCA output end to the car monitor.
The camera switch is controlled by the reverse gear shift.
Please take care of the sealing to prevent water leakage when installation.
Please Consult an experienced technician if you are not familiar with installing the Backup Camera.
WITHOUT the small “Allen Hex Key” tool Upgraded technology, get rid of “hex key”, a so small tool that easy to be lost.
ONLY the generic suitable tool can be helpful for you to release the set screw on the camera and adjust the camera up and down for desired view angle.
1 X License Plate Frame Mount Rear View Camera
1 X 3.5ft Power Cable
1 X 20ft RCA Video Cable
1 X User Manual
- [High Waterproof Rate Camera]: Apply IP68 high waterproof level, more effectively protect it from water and foggy in the camera after long time use. Professional shockproof design, The license plate frame that comes with package is made of heavy quality stainless steel, can be securely installed by the metal screws.
- [Full HD Night Vision Camera]: The rearview camera is built with 8 IR Red LEDs which would not light up bright white announcing the existing of the camera at night, but it will provides you with clear realistic images not matter the daytime or night time parking.
- [Easy to install]: The camera is easy to install, you don’t need to drill into anything for it to mount on your license. The package comes with all the necessary plugs and cables to hook up. It comes with installation manual, once you have installation problem, please contact us freely, we will find the best solution for you.
- [Compatible for Most Vehicle]: the universal car rearview camera is suitable for most DC 12V vehicles like trucks, SUVS. And the video cable is about 20ft /6M, easily connected to any monitor with RCA video input. we always take 100%customers satisfaction as our top priority. We promise 3 Month Warranty and 30 days money back to our customer if you are not satisfied with our product quality, any problem and opinion after you receive our product, please don’t hesitate to contact us firstly, we
- [Wide Viewing Angle]: Wide Viewing Angle: The Camera is built in wide angle lens that give you a 170° extra wide Vertical and 145° horizontal Viewing Angle, far enough to show the ground less than 2 feet from the back bumper, and show the horizon at the same time,which will help you check the invisible blind spot more clearly and park your car safely. The camera is special designed and can slightly rotate approximately 45 degree, you can adjust the angle to meet your need when you install on dif