Notice:The camera can’t be switched on when you receive it?
please do use our original charger to connect the camera directly to your car charger for a few hours first and check again.
Since the camera has probably run out of power now. Charging the camera via USB cable or other chargers is not recommended,
since voltage from these charging methods is not fully compatible with the camera,
which will even cause damage to the camera if charged that way.

Memory Card
1.Please insert TF card before camera is switched on and do not remove the card until the camera is off.if you insert or pull it with dash cam on, this might cause loss of software, the dash cam will turn on and off automatically.
2.Please make sure the front of TF card
3.If one card is not compatible with camera, please remove and insert again. If it still doesn’t work, please change another card and try again.
4.New TF card should be formatted first before using.
5.Please close parking monitoring function and motion detection funct ion when the camera is recording on the road. These 2 functions are only necessary when your car stops.

Specification
Display: 2.31 Inch Lcd Screen
Optical format: 1/2.5″ 2M/5M pixel COMS
LENS: Wide angle view 140 degree
Video resolution: 1920*1080 30FPS/1280*720 60FPS
License plate: YES
G-sensor: YES
Video record format: M-JPEG ,AVC1
File format: Video: AVI; Photo: JPEG
Video save interval: 1 min/3 min/5min
Record loop: optional cyclic video recording
Memory card : TF Card up to 32GB
Power: USB power adapter, Built-in Battery

Microphone: support

Package Content:
1 x AUBBC Car DVR
1 x Car Charger
1 x USB Cable
1 x User Manual
1 x Car Mount
1 x 32GB Kingston card
1 x AUBBC High-speed card reader

Product Features

• 1.2.31 inch TFT LCD High resolution,Full HD 1920*1080P resolution video recording
• 2.140 degrees A+ grade high-resolution wide angle lens
• 3.Seamless loop-recording function / Motion detection function / G-sensor function
• 4.Support TF memory card, up to 32GB
• 5.Please do use our original charger to connect the camera directly to your car charger for a few hours first and check again. Since the camera has probably run out of power now. Charging the camera via USB cable or other chargers is not recommended, since voltage from these charging methods is not fully compatible with the camera, which will even cause damage to the camera if charged that way.