UHPPOTE 1 Port 10/100M PoE Extender IEEE802.3af For Ethernet Security Systems IP Camera

This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases Features: Comply with IEEE 802.af Power over Ethernet 10/100M Supported Extender the range of PoE an additional 120 meters(393ft) Automatically detects and protects PoE equipments from being damaged by incorrect installation Plug-and Play, no configuration required 1 Port PoE extender can

This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases

Features:
Comply with IEEE 802.af Power over Ethernet
10/100M Supported
Extender the range of PoE an additional 120 meters(393ft)
Automatically detects and protects PoE equipments from being damaged by incorrect installation
Plug-and Play, no configuration required
1 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 UTP cable.

Other Specification:
PoE input: 1 RJ45 port
PoE output: 1 RJ45 port
Network Medium: Cat5 or better UTP cables (less than 120m/393ft)
Repeater Mode: Store and forward
MAC Address Table: 2K
Packet Buffer Memory: 48 Byte
Switching Capacity: 400Mbps
PoE Standard: IEEE 802.3af
Input power: 13 Watts
Output power: 12.2 Watts
Power Supply Type: 1/2+,3/6-,Mode A,End-Span
Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet;
Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU,Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC;
Working Temperature: 0°C~40°C / 32 ℉~104℉
Working Humidity: 10%~90%,No Condensation
Storage Temperature: -30°C~70°C / -22℉~158℉
Storage Humidity: 5%~90%, No Condensation;
Dimension: 75x37x26.5mm / 2.95” x 1.46” x 1.04”
Weight: 60g / 2.12oz

Note:
Please don’t place any heavy thing on the PoE extender;
To prevent the water seeping into the extender,please keep PoE extender away wet environment;
Suggest to use PoE extender indoors.When installing the extender in outdoor,please install it in a waterproof place.

Package Include:
1 x 1-Port PoE Extender

Product Features

  • Comply with 10/100BASE-TX,IEEE 802.3 af-PoE
  • Power input for single port is 13W
  • Power output for single port is 12.2W
  • 1-Port PoE Extender has 2 10/100M Lan ports,among them,one for power input,the other for power output
  • The PoE Extender can only be used for CCTV IP network camera PoE data extension and amplification (CAN NOT TRANSMIT HOME NETWORK OR OTHER NETWORK CAMERA SIGNAL).