Megapixel camera with 1/2.9″ CMOS sensor and TVI / HD-CVI / HD-AHD / 960H.

The TVI / HD-CVI / HD-AHD interface allows to transmission of analog video signal via coaxial cable in 1080p resolution. It enables the transmission of HD resolution images for even 500 m distance with keeping the low costs of the installation. During transmission there are no delays and is maintained the original, high quality image.
The used motozoom lens with 2.8 … 12 mm focal length allows to remote view angle adjustment. Defualt output is HD-TVI. The appropriate signal format selection is done by tilting and holding the joystick for 5s without entering to the OSD menu. Changing the signal to the NTSC in the camera causes loss of image in connected HD-AHD/HD-CVI/Analog recorder.
Switch to TVI: Press Rightward for 3 Seconds
Switch to AHD: Press leftward for 3 Seconds
Switch to CVBS: Press Upward for 3 Seconds
Switch to CVI: Press Downward for 3 Seconds
Attention!
After connecting the power supply, you can change the standard with a joystick only once. To re-change the standard with the joystick, reconnect the power to the camera. After changing the standard, the joystick controls the camera lens (up, down).

Product Features

• 2mp 1080p hd TVI/CVI/AHD/960H analog output high-performance CMOS
• 2.8-12mm motorized vari-focal lens
• True day/night OSD menu,DNNR,smart IR
• Up to 50m IR distance,Up the Coax( HIKVISION-C,PELCO Protocol)
• IP 66 weatherproof,metal bullet housing