SL-126Q/B Seco-Larm Blue Strobe Light 6-12VDC

This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases SECO-LARM SL-126Q/B Blue Security Strobe Light, 6~12VDC Features – For “informative” general signaling requirements. – Incorrect polarity cannot damage circuit or draw current. – Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery,

This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases

SECO-LARM SL-126Q/B Blue Security Strobe Light, 6~12VDC

Features
– For “informative” general signaling requirements.
– Incorrect polarity cannot damage circuit or draw current.
– Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery, as the battery is drained the strobe light will continue to function.
– Low current consumption with long operating lifespan of over 300 continuous hours (2,000,000 flashes).
– Lens is made of high-impact resistant acrylic, case of high-impact resistant ABS plastic.
– The SECO-LARM strobe light comes with a protective inner cover. This protects the high-voltage xenon tube when the colored lens has been removed.
– Use in temperature ranging from -22ºF (-30ºC) to 140ºF (60ºC).
– For 6- to 12-Volt use.

Specifications
– Circuits: All solid-state
– Input Connections: Red/Positive Black/Ground
– Leads: #18 Gauge, 12″ long
– Electrical Protection: Reverse polarity protected
– Illumination: 100,000 Candlepower
– Operating Life: Over 2,000,000 flashes (300 hours continuous)
– Input voltage: 6~12 VDC
– Operating Temperature: -22º~140º F (-30º~60º C)
– Base: High-impact black ABS
– input current: 120mA +/- 20%@6VDC 200mA +/- 20%@12VDC
– Flash Rate: Over 60 per minute at 6 VDC. Over 90 per minute at 12 VDC
– Lens: High-impact resistant acrylic

Product Features

  • For “informative” general signaling requirements. Incorrect polarity cannot damage circuit or draw current.
  • Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery, as the battery is drained the strobe light will continue to function.
  • Low current consumption with long operating lifespan of over 300 continuous hours (2,000,000 flashes).
  • Lens is made of high-impact resistant acrylic, case of high-impact resistant ABS plastic. The SECO-LARM strobe light comes with a protective inner cover. This protects the high-voltage xenon tube when the colored lens has been removed.
  • Use in temperature ranging from -22ºF (-30ºC) to 140ºF (60ºC). For 6- to 12-Volt use. Operating Life: Over 2,000,000 flashes (300 hours continuous)

This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases