From the manufacturer The working of the host and PIR sensor: When the host or PIR sensor detects a person, the alarm will immediately sound an alarm of up to 12 decibels, shocking the intruder. At the same time, the mobile phone will immediately receive a push alarm message to inform the owner to take timely measures to reduce property losses. The working of door/window sensor: When the door/window sensor is closed, it does not alarm; the door/window sensor is separated by two parts, and a high-pitched alarm is immediately issued. The door/window sensor main unit and the magnetic strip are respectively installed on the door (window) and the door frame (window frame), the door and window are opened, the magnetic strip is separated from the main unit, and the deafening high-pitched alarm is immediately issued, which is full of deterrence! Remote control by mobile APP – Easy to operate Through the mobile APP, you can easily master the home host system, the status is clear at a glance, remote management, timing arm, arm delay and clock, etc., device management, anytime, anywhere. [Trouble shooting] for failure on Wi-Fi configure: 1. Check the network: Please make sure the base unit and your phone use same 2.4G Wi-Fi network. If your router has a 5G Wi-Fi network, please turn off the 5G Wi-Fi network or set the 2.4G Wi-Fi network and the 5G Wi-Fi network to different names. 2. Make sure Wi-Fi password input correctly. 3. Make sure the base unit flash red before you start Wi-Fi configure, if not flash red, please check if you charge it or battery are loaded correctly. 4. Make sure the Wi-Fi signal is good to carry on Wi-Fi configure. Sound And Light Alarm : When the host alarms, the alarm sounds up to 12 decibels, and the alarm flashes red, which shocks the intruder. The alarm sound volume can be adjusted manually and has 5 levels. About the sensors: You can only add up to 8 sensors in the APP. In this alarm system it has been equipped with 8 sets of sensors (6 sets of door/window sensors, 1 push button alarm sensor and 1 PIR sensor). Supports Multi Work Conditions : 1) No network, standalone on-site alarming via the main panel. 2) No network, standalone on-site alarming via remote control. 3) Wi-Fi network, APP remotes the whole security system anywhere. It also compatible with some specified camera. Attention: Please use DC to power the product in daily use, alkaline batteries are only for Emergency, which only last 5-6 hours and will affect the notification-receiving. Long Detection Distance And Wide Sensing Area : The detection range of the alarm can reach 8 meters, the sensing width is about 11°, and the height is about 6°. Color:white Warm tips: you will not be able to make a phone call alarm if you do not have a wired telephone installed at home. The alarm information can only be pushed via app. Landline is must if you need phone call alarm; Wi-Fi connection is available for text notification alarm in your cellphone, no phone call alarm SPECIFICATION 1). main controller hub: function: responsible for communicating with all sensors and decide when and how to send you alert notification. Support expansions: 64Pcs sensors, 8Pcs remote Tags, built-in 3. 7V 8mAh back up battery monitoring types: dual network, Phone line and wife frequency: 433MHz input: DC 5V 1A siren loud around 8dB 2). PIR motion sensor: function: protect any place of your house that can’t be cover by

Product Features

• Easy to control: Wi-Fi connection works on 2. 4GHz bandwidth. With free IOS/Android smartphone app, You can adjust whole system setting on app in your own phone anywhere anytime.
• Intrusion protection: 6sets wireless contact sensor used On doors, windows, cabinets and any important entry areas of your home. When someone try to intrude into your house through window or door, opening them a little will trigger the sensor to alert you; 1 sets wireless PIR motion sensor to detect movement within 8Meter, 11 Degree field of view coverage day and night. It can mount on a wall, in a corner to protect against intruder that enter without opening a door or window
• Reliable system: The main controller hub is responsible for connecting with all of sensors,triggers siren loud around 120db to scare burglars.With backup battery support 8hours working if lose power;Support rename different zone(8 zones) name,sensors name,zone property name, then hub will tell you exactly what happened and which door, window or cabinet just opened so that you can track and make better informed decisions
• Diy installation: DIY home security, no contracts no monthly monitoring fee. Tool-free setup and assembling, plug and play installation, you can take and remove easily. Supports Expansion of up to 8pcs sensors and 4pcs remote controls paired with one main Panel hub. All control in app by your smartphone
• WARRANTY : This is a 2.4ghz supported security alarm system and it does not support 5ghz networks. Kindly refer the User Manual before use; Full 1-Year Warranty and Lifetime support provided . Please email our customer service yylbsales@hotmail.com to get help for any problems.